BAM of Iusacell & GNU/Linux -> ppp0
Finally !!!, and after years the Iusacell guys gets a PCMCIA card total full compatible with GNU/Linux for kernel 2.6.2X, ( works fine in Fedora & Mandriva distros ) …. this card works for Mexico ( Iusacell company ), the max speed is 1M up & 512k down .. the reality is: ~750k up & 150k down speed. This are the features of my card:
Model: UTstartcom
Chip: Curitel Communications, Inc.
This is the config file for wvdial
cat /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
#Modem Type = USB Modem
Phone = #777
ISDN = 0
Password = 1
Username = 2
Modem = /dev/ttyACM0
Baud = 460800
Stupid Mode = yes
this is the LOG:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Jul 4 22:17:20 2008
--> Pid of pppd: 6661
--> Using interface ppp0
--> pppd: Connect: ppp0 < --> /dev/ttyACM0
–> local IP address 200.76.73.XX
–> remote IP address 192.168.225.1
–> primary DNS address 207.83.200.201
–> secondary DNS address 4.2.2.2